2606D-E13TA Industrial Open Power Unit

Industrial Open Power Units 2606D-E13TA

Request Consultation Find your Distributor

Key Specs

Maximum Power
690 hp
515 kW
Maximum Torque
2360 lb-ft @ 1300 rpm
3200 Nm @ 1300 rpm
Emissions
UN ECE R96 Stage IIIA, Brazil MAR-1
UN ECE R96 Stage IIIA, Brazil MAR-1

Overview

The Perkins® 2606D-E13TA IOPU provides a complete plug-and-play power solution to meet UN ECE R96 Stage IIIA, Brazil MAR-1, and other equivalent emission standards. Beyond the standard options, the IOPU configurations come equipped with an integrated cooling pack, an on-engine low pressure fuel system inclusive of filters, and complete wire harnessing leading to a single engine-mounted ECM.

Product Specifications for 2606D-E13TA

Maximum Power 690 hp 515 kW
Maximum Torque 2360 lb-ft @ 1300 rpm 3200 Nm @ 1300 rpm
Rated Speed 1800-2100 rpm 1800-2100 rpm
Minimum Power 456 hp 340 kW
Emissions UN ECE R96 Stage IIIA, Brazil MAR-1 UN ECE R96 Stage IIIA, Brazil MAR-1
Number of Cylinders In-line 6 In-line 6
Cycle 4 stroke 4 stroke
Bore 5.1 in 130 mm
Stroke 6.4 in 162 mm
Displacement 787.2 in³ 12.9 l
Compression Ratio 16.5:1 16.5:1
Aspiration Turbocharged aftercooled Turbocharged aftercooled
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment DOC+DPF+SCR DOC+DPF+SCR
Length 89 in 2249 mm
Width 46 in 1160 mm
Height 62 in 1575 mm
Dry Weight 3547 lb 1609 kg

2606D-E13TA Standard Equipment

Air System

  • Air-to-air aftercooled
  • Front or rear exhaust configurations available
  • Wastegated turbocharger

Control System

  • Automatic altitude compensation
  • Configurable software features
  • Engine monitoring system SAE J1939 broadcast and control
  • Integrated, advanced electronic control module (ECU)
  • Power compensated for fuel temperature
  • Remote fan control

Cooling System

  • Centrifugal water pump
  • Detailed guidance on cooling system design and validation available to ensure machine reliability
  • Fluids module, which includes: water pump, oil cooler, top-service cartridge oil filter (optional), dual coolant thermostats, and single oil thermostat

Flywheel and Flywheel Housing

  • Standard SAE No. 1 flywheel housing with SAE No. 14 or 140 flywheels

Fuel System

  • Common rail direct injection fuel system with zero-static leak injectors
  • Fuel manifold which allows for outboard or rearward fuel return-to-tank plumbing as well as coolant supply
  • Fuel module, which includes: primary and secondary cartridge filters, and a manual or electric priming pump
  • Oil-lubricated high pressure fuel and mechanical fuel transfer pump combination
  • Remote fuel module available

General

  • Lifting eyes
  • Vibration damper

Oil System

  • Choice of front, rear or centre sumps
  • Gear-driven oil pump
  • No mess service oil filter drainback feature built into fluids module
  • No-service-needed passive open crankcase ventilation filtration system built into the valve cover
  • Oil cooler
  • Oil dipstick
  • Oil filler
  • Oil level sensor
  • Remote oil filter variant of the fluids module available

Power Take-Off (PTO)

  • Up to 5 additional power take-offs: 2 rear facing (SAE B, C, or D), 2 forward-facing (SAE A or SAE B), and an additional low-mount forward-facing (SAE B)

2606D-E13TA Optional Equipment

Industrial Power Unit

  • Factory-installed cooling pack which includes the radiator, the air-to-air aftercooler (ATAAC), coolant lines to and from the radiator, and air lines to and from the ATAAC.
  • Factory-installed engine-mounted aftertreatment system, pre-connected exhaust air lines, and air cleaners
  • Factory-installed instrument / control panels embedded with telematics units

See how 2606D-E13TA compares against frequently compared products.