Power Rating
| Maximum Power | 48 HP 36 kW |
| Maximum Torque | 122 lb-ft @ 1600 rpm 166 Nm @ 1600 rpm |
| Rated Speed | 2800 rpm 2800 rpm |
Industrial Open Power Units 403J-E17T
Request Consultation Find your DistributorKey Specs
- Maximum Power
- 48 HP
- 36 kW
- Maximum Torque
- 122 lb-ft @ 1600 rpm
- 166 Nm @ 1600 rpm
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)
- EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)
Overview
The Perkins® 403J-E17T IOPU provides a complete plug-and-play power solution to meet EU Stage V, U.S. EPA Tier 4 Final and Japan 2014 (Tier 4 Final) emission standards. With a wide choice of options, engine configurations and robust technologies, you can integrate the 403J-E17T into equipment with minimal re-engineering that can help save valuable costs.
Features At A Glance
Low cost installation
Additionally, multiple installation options provide an easy installation for OEM’s and minimise the IOPU total size to enable a low cost installation into your machine.
Powerful performance
Improved power by 24 percent and torque by 38 percent over the previous generation Perkins engine.
Fuel efficiency optimised to match operating cycles of a wide range of non-road equipment encourages standardisation across numerous applications or OEM variants to help reduce your variety.
Straightforward maintenance
Service points are located on the cold side of the engine for a safer service.
Factory fitted Diesel Particulate Filter is made for the life of your engine and no workcycle interruption for regeneration.
Product Specifications for 403J-E17T
Emission Standards
| Emissions | EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final) EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final) |
General
| Number of Cylinders | 3 inline 3 inline |
| Bore | 3.3 in 84 mm |
| Stroke | 3.9 in 100 mm |
| Displacement | 101 in³ 1.662 l |
| Compression Ratio | 17.0:1 17.0:1 |
| Aspiration | Turbocharged Turbocharged |
| Combustion System | Direct Injection Direct Injection |
| Rotation from Flywheel End | Anti-clockwise Anti-clockwise |
| Aftertreatment | DOC+DPF DOC+DPF |
Engine Dimensions*
| Length | 33.6 in 854 mm |
| Width | 23.5 in 596 mm |
| Height | 37.8 in 961 mm |
| Dry Weight | 494 lb 224 kg |
Disclaimer
| Note 1 | *Final dimensions dependent on selected options *Final dimensions dependent on selected options |
403J-E17T Standard Equipment
Air System
- Turbocharged
Electrical and Electronics
- Alternator 12 volts, 85 amp
- Electronic control module – chassis mounted
- Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
- Glow plug starting aid
- Starter motor 12 volts
- The wiring harness, connectors and sensors are waterproof and designed to withstand harsh off-highway environments
Flywheel and Flywheel Housing
- Flywheel and flywheel housing options
Fuel System
- Electronic 2000 bar common rail fuel system
- Fuel filter with water detector
Power Take-Off (PTO)
- SAE A PTO drive
General
- Cast iron engine block
- An extensive range of options are available, enabling you to prepare a specification matched precisely to your needs
See how 403J-E17T compares against frequently compared products.
Industrial
403J-E17T
Selected
- Maximum Power
- 48 HP
- 36 kW
- Maximum Torque
- 122 lb-ft @ 1600 rpm
- 166 Nm @ 1600 rpm
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)
- EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)
Industrial
403D-15
- Maximum Power
- 32.5 HP
- 24.2 kW
- Maximum Torque
- 69.6 lb-ft @ 1800 rpm
- 94.4 Nm @ 1800 rpm
- Emissions
- EU Stage IIIA/U.S. EPA Tier 4 Interim equivalent, China NRIII
- EU Stage IIIA/U.S. EPA Tier 4 Interim equivalent, China NRIII
Industrial
404D-22
- Maximum Power
- 51 HP
- 38 kW
- Maximum Torque
- 103.7 lb-ft @ 1800 rpm
- 140.6 Nm @ 1800 rpm
- Emissions
- EU Stage IIIA/U.S. EPA Tier 4 Interim equivalent, China NRIII
- EU Stage IIIA/U.S. EPA Tier 4 Interim equivalent, China NRIII
