Power Rating
| Maximum Power | 74 HP 55 kW |
| Maximum Torque | 221 lb-ft @ 1600 rpm 300 Nm @ 1600 rpm |
| Rated Speed | 2200 - 2400 rpm 2200 - 2400 rpm |
| Minimum Power | 74 HP 55 kW |
Industrial Diesel Engines 904J-E28T
Request Consultation Find your DistributorKey Specs
- Maximum Power
- 74 HP
- 55 kW
- Maximum Torque
- 221 lb-ft @ 1600 rpm
- 300 Nm @ 1600 rpm
- Emissions
- EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
- EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
Overview
The 904 Series engines offer a compact power solution for off-highway applications in construction, agriculture and industrial.
For our customers these compact, 4 cylinder engines provide excellent performance in power, peak and low speed torque, fuel consumption and transient response.
Reliability and easy service access are integral to the design of the engines. It is available with a range of installation options to enable OEMs to minimise the size of the engine bay of their machines.
Features At A Glance
A lifetime of low cost
Hydraulic tappets, multi-vee belts and 500 hour service intervals enable low cost maintenance.
Dependable power
Quality, reliability and consistency are assured. Our facilities worldwide employ the same efficient processes, the same tested and validated components, and the same stringent quality controls wherever your engines are manufactured.
Industry leading flexibility
Product Specifications for 904J-E28T
Emission Standards
| Emissions | EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4 EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4 |
General
| Number of Cylinders | 4 inline 4 inline |
| Cycle | 4 stroke 4 stroke |
| Bore | 3.5 in 90 mm |
| Stroke | 4.3 in 110 mm |
| Displacement | 171 in³ 2.8 l |
| Compression Ratio | 17.0:1 17.0:1 |
| Aspiration | Turbocharged Turbocharged |
| Combustion System | Direct injection Direct injection |
| Rotation from Flywheel End | Anti-clockwise Anti-clockwise |
| Aftertreatment | DOC+DPF DOC+DPF |
| Cooling System | Liquid Liquid |
Engine Dimensions*
| Length | 24.9 in 633 mm |
| Width | 21.4 in 543 mm |
| Height | 30.9 in 786 mm |
| Dry Weight | 750 lb 340 kg |
Disclaimer
| Note 1 | *Final dimensions dependent on selected options *Final dimensions dependent on selected options |
904J-E28T Standard Equipment
Electrical and Electronics
- 12V system
- Data interface via CANbus J1939
- Full electronic control
- Glow plugs for best cold starting with minimum battery impact
- High power alternator and starter motor options
- Sensors and robust wiring harness included
Fuel System
- Electronic high pressure common rail
- Fuel filter - chassis mounted
- Water sensor included - early warning for operator
General
- Cold-start capable with standard equipment to -25°C
- Supplied painted or lacquered
Oil System
- Oil filters. Mounting options available on either side of the engine, plus remote
- Dipsticks. Choice of position and length
- Oil fillers. Multiple locations on engine to allow for choice of service access
- High incline sump. 35° continuous in all directions. Suitable for machines that are used on steep slopes
Power Take-Off (PTO)
- SAE-A and SAE-B interfaces available
Aftertreatment Equipment
- Aftertreatment mounted on engine as standard, remote available
See how 904J-E28T compares against frequently compared products.
Industrial
904J-E28T
Selected
- Maximum Power
- 74 HP
- 55 kW
- Maximum Torque
- 221 lb-ft @ 1600 rpm
- 300 Nm @ 1600 rpm
- Emissions
- EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
- EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
Industrial
404D-22TA
- Maximum Power
- 66 HP
- 49.2 kW
- Maximum Torque
- 147.5 lb-ft @ 1800 rpm
- 200 Nm @ 1800 rpm
- Emissions
- EU Stage IIIA/U.S. EPA Tier 4 Interim equivalent
- EU Stage IIIA/U.S. EPA Tier 4 Interim equivalent
Industrial
904J-E28TA
- Maximum Power
- 74 HP
- 55 kW
- Maximum Torque
- 280 lb-ft @ 1360 rpm
- 380 Nm @ 1360 rpm
- Emissions
- EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
- EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
