Power Rating
| Maximum Power | 85 HP 63.5 kW |
| Maximum Torque | 216 lb-ft @ 1200 rpm 293 Nm @ 1200 rpm |
| Rated Speed | 2200 rpm 2200 rpm |
| Minimum Power | 67 HP 50 kW |
Industrial Diesel Engines 1104A-44
Request Consultation Find your DistributorKey Specs
- Maximum Power
- 85 HP
- 63.5 kW
- Maximum Torque
- 216 lb-ft @ 1200 rpm
- 293 Nm @ 1200 rpm
- Emissions
- Non-Certified
- Non-Certified
Overview
Whatever your application, there's an 1104 engine for you. Part of the Perkins 1100 Series, the range's 4 cylinder, 4.4 litre engines are smooth and quiet in operation. Designed to meet EU Stage II/IIIA and U.S. EPA Tier 2/Tier 3 equivalent emissions standards, the 1104 range offer a choice of mechanical or electronically controlled common rail engines. Electronically controlled engines deliver the right fuel injection for the load applied to the engine. Common front and rear ends, connection points and components across the range, making it easy to install a different 1100 Series engine in your application.
Features At A Glance
Product Specifications for 1104A-44
Emission Standards
| Emissions | Non-Certified Non-Certified |
General
| Number of Cylinders | 4 inline 4 inline |
| Cycle | 4 stroke 4 stroke |
| Bore | 4.1 in 105 mm |
| Stroke | 5 in 127 mm |
| Displacement | 269 in³ 4.4 l |
| Compression Ratio | 19.3:1 19.3:1 |
| Aspiration | Naturally aspirated Naturally aspirated |
| Combustion System | Direct injection Direct injection |
| Rotation from Flywheel End | Anti-clockwise Anti-clockwise |
| Aftertreatment | - - |
| Cooling System | Liquid Liquid |
Engine Dimensions*
| Length | 30.2 in 768 mm |
| Width | 22 in 558 mm |
| Height | 31.2 in 795 mm |
| Dry Weight | 787 lb 357 kg |
Disclaimer
| Note 1 | *Final dimensions dependent on selected options *Final dimensions dependent on selected options |
1104A-44 Standard Equipment
Air System
- Cast iron exhaust manifold – centre side outlet
- Integral inlet manifold
Electrical and Electronics
- 12 volt alternator
- 12 volt starter motor
Cooling System
- Cooling fan
- Gear-driven coolant pump
- Water outlet
General
- Cast iron engine block
- Balancer or non-balancer
- Glow plug starting aid
Oil System
- Lubricating oil sump
- Dipstick (left or right position)
Power Take-Off (PTO)
- Provision for PTOs
See how 1104A-44 compares against frequently compared products.
Industrial
1104A-44
Selected
- Maximum Power
- 85 HP
- 63.5 kW
- Maximum Torque
- 216 lb-ft @ 1200 rpm
- 293 Nm @ 1200 rpm
- Emissions
- Non-Certified
- Non-Certified
Industrial
1104C-44TA
- Maximum Power
- 130.1 HP
- 97 kW
- Maximum Torque
- 369 lb-ft @ 1400 rpm
- 500 Nm @ 1400 rpm
- Emissions
- EU Stage II/U.S. EPA Tier 2 equivalent
- EU Stage II/U.S. EPA Tier 2 equivalent
Industrial
1104A-44T
- Maximum Power
- 108 HP
- 80.5 kW
- Maximum Torque
- 298 lb-ft @ 1400 rpm
- 404 Nm @ 1400 rpm
- Emissions
- Non-Certified
- Non-Certified
