Industrial Diesel Engines 904J-E36TA for Tractors

Speak to an expert Find your Distributor

Key Specs

Maximum Power
134 HP
100 kW
Maximum Torque
391 lb-ft @ 1500 rpm
530 Nm @ 1500 rpm
Emissions
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4

Overview

The 904 Series, 3.6 engine offers the perfect solution for frameless agricultural tractors - compact, powerful and quiet. Compact packaging including structural capability for front bolster and rear transmission, including twin balancers for operator comfort and rigid mounting; the 3.6 is the cornerstone of your tractor.

Our tight engine packaging combined with our compact aftertreatment is able to be mounted under the tractor bonnet. This enables tight turning circles and uninterrupted sight lines with no A-Pillar or battery box interference; the 904 Series enables less administration and easy logistics for the original equipment manufacturer.

Powerful, with excellent performance in power, peak and low speed torque, fuel consumption and transient response; the 3.6 has all the performance required including for downsizing from larger displacement engines for your tractor and your customers. A naturally quiet engine by design, your customers will be impressed with the noise and sound quality of the engine, making the 3.6 a natural choice for tractors used around livestock and noise sensitive areas.

Meets EU Stage V, U.S. EPA Tier 4 Final and Japan MLIT Step 4.

Product Specifications for 904J-E36TA for Tractors

Maximum Power 134 HP 100 kW
Maximum Torque 391 lb-ft @ 1500 rpm 530 Nm @ 1500 rpm
Rated Speed 2000-2400 rpm 2000-2400 rpm
Minimum Power 74 HP 55 kW
Emissions EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4 EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
Number of Cylinders 4 inline 4 inline
Cycle 4 stroke 4 stroke
Bore 3.9 in 98 mm
Stroke 4.7 in 120 mm
Displacement 220.9 in³ 3.6 l
Compression Ratio 17.0:1 17.0:1
Aspiration Turbocharged aftercooled Turbocharged aftercooled
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Aftertreatment DOC+DPF or DOC+DPF+SCR DOC+DPF or DOC+DPF+SCR
Cooling System Liquid Liquid
Length 26.8 in 681 mm
Width 22.2 in 564 mm
Height 33.7 in 885 mm
Dry Weight 992 lb 450 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options

904J-E36TA for Tractors Standard Equipment

Electrical and Electronics

  • Wide choice of interfaces for common transmissions
  • 12V systems
  • Data interface via CANbus J1939
  • Full electronic control
  • Glow plugs for best cold starting with minimum battery impact
  • High power alternator and starter motor options
  • Sensors and robust wiring harness included

Fuel System

  • Electronic high pressure common rail
  • Fuel filter - chassis mounted
  • Water sensor included - early warning for operator

General

  • Structual sump including twin balancers for front bolster mounting
  • Cold-start capable with standard equipment to -25°C
  • Supplied painted or lacquered
  • Ag backplate for transmission mounting

Oil System

  • Oil filters. Mounting options available on either side of the engine, plus remote
  • Dipsticks. Choice of position and length
  • Oil fillers. Multiple locations on engine to allow for choice of service access
  • High incline sump. 25° continuous in all directions

Power Take-Off (PTO)

  • SAE-A and SAE-B interfaces available

Aftertreatment Equipment

  • Aftertreatment mounted on engine as standard, remote available
  • For engine power ratings above 56 kW, Selective Catalytic Reduction (SCR) will also be added

See how 904J-E36TA for Tractors compares against frequently compared products.