Total Power Range
| Gross Mechanical Output | 127-160 kWm 127-160 kWm |
| Typical Electrical Output | 135-169 kVA (108-135 kWe) 135-169 kVA (108-135 kWe) |
| Rated Speed | 1500/1800 rpm 1500/1800 rpm |
Electric Power Generation 1106A-70TG
Request Consultation Find your DistributorKey Specs
- Gross Mechanical Output
- 127-160 kWm
- 127-160 kWm
- Typical Electrical Output
- 135-169 kVA (108-135 kWe)
- 135-169 kVA (108-135 kWe)
- Emissions
- Fuel Optimised
- Fuel Optimised
Overview
The 6 cylinder, 7 litre Perkins 1106 range of ElectropaK engines gives you all the power you need for electric power generation. The engines in the range share a common platform with the option of mechanical and common rail fuel systems enabling use of the same platform over different emissions territories. Reliable, dependable and with a low cost of ownership, the engines can cope with variations in fuel quality that occur in different parts of the world.
Features At A Glance
Product Specifications for 1106A-70TG
Emission Standards
| Emissions | Fuel Optimised Fuel Optimised |
50 Hz Typical Electrical Output
| Prime | 135 kVA 135 kVA |
| Standby | 150 kVA 150 kVA |
60 Hz Typical Electrical Output
| Prime | 121.5 kWe 121.5 kWe |
| Standby | 135 kWe 135 kWe |
General
| Number of Cylinders | 6 vertical inline 6 vertical inline |
| Bore | 4.13 in 105 mm |
| Stroke | 5.3 in 135 mm |
| Displacement | 428 in³ 7 l |
| Compression Ratio | 18.2:1 18.2:1 |
| Aspiration | Turbocharged Turbocharged |
| Combustion System | Direct injection Direct injection |
| Rotation from Flywheel End | Anti-clockwise Anti-clockwise |
| Cooling System | Liquid Liquid |
| Aftertreatment | - - |
| Typical Alternator Efficiency | 91% 91% |
| Switchable | No No |
ElectropaK Dimensions
| Length | 65 in 1648 mm |
| Width | 30 in 760 mm |
| Height | 43 in 1092 mm |
| Dry Weight | 1629 lb 739 kg |
Disclaimer
| Note 1 | *Final dimensions dependent on selected options *Final dimensions dependent on selected options |
Definitions
| Prime Power | Unlimited hours usage, with an average load factor of 80 percent over each 24 hour period. A 10 percent overload is available for 1 hour in every12 hours operation. Unlimited hours usage, with an average load factor of 80 percent over each 24 hour period. A 10 percent overload is available for 1 hour in every12 hours operation. |
| Standby Power | Limited to 500 hours annual usage, with an average load factor of 80 percent of the published Standby power rating over each 24 hour period. Up to 300 hours of annual usage may be run continuously. No overload is permitted on Standby power. Limited to 500 hours annual usage, with an average load factor of 80 percent of the published Standby power rating over each 24 hour period. Up to 300 hours of annual usage may be run continuously. No overload is permitted on Standby power. |
1106A-70TG Standard Equipment
Air inlet system
- Air cleaner and brackets
- Exhaust manifold
- Induction manifold
Control system
- Alternator
- Starter motor
Cooling system
- Tropical radiator pipes and guards
Flywheels and flywheel housing
- Flywheel and starter ring
Fuel system
- Fuel filter
General
- Cold start aid
- Engine mountings
Oil system
- Lubricating oil sump
- Oil filters
See how 1106A-70TG compares against frequently compared products.
Electric Power Generation
1106A-70TG
Selected
- Gross Mechanical Output
- 127-160 kWm
- 127-160 kWm
- Typical Electrical Output
- 135-169 kVA (108-135 kWe)
- 135-169 kVA (108-135 kWe)
- Emissions
- Fuel Optimised
- Fuel Optimised
Electric Power Generation
1104D-E44TAG
- Gross Mechanical Output
- 78-120 kWm
- 78-120 kWm
- Typical Electrical Output
- 80-125 kVA (64-100 kWe)
- 80-125 kVA (64-100 kWe)
- Emissions
- EU Stage IIIA/U.S. EPA Tier 3
- EU Stage IIIA/U.S. EPA Tier 3
Electric Power Generation
1106A-70TAG
- Gross Mechanical Output
- 140-204 kWm
- 140-204 kWm
- Typical Electrical Output
- 150-220 kVA (120-176 kWe)
- 150-220 kVA (120-176 kWe)
- Emissions
- Fuel Optimised
- Fuel Optimised
