Total Power Range
| Gross Mechanical Output | 8.6-9.5 kWm 8.6-9.5 kWm |
| Typical Electrical Output | 9-10 kVA (7.2-8 kWe) 9-10 kVA (7.2-8 kWe) |
| Rated Speed | 1500 rpm 1500 rpm |
Electric Power Generation 403A-11G
Request Consultation Find your DistributorKey Specs
- Gross Mechanical Output
- 8.6-9.5 kWm
- 8.6-9.5 kWm
- Typical Electrical Output
- 9-10 kVA (7.2-8 kWe)
- 9-10 kVA (7.2-8 kWe)
- Emissions
- Fuel Optimised
- Fuel Optimised
Overview
The Perkins 403 range of electric power (EP) engines delivers the same compact benefits of its 2 cylinder stablemate, but takes a stride forward in terms of noise, refinement and power. The 3 cylinder range offers excellent power density and superb fuel economy and is designed to meet your power generation needs in both unregulated territories where extreme conditions are likely, and higher regulated territories with more stringent emissions standards.
Features At A Glance
Product Specifications for 403A-11G
Emission Standards
| Emissions | Fuel Optimised Fuel Optimised |
50 Hz Typical Electrical Output
| Prime | 9 kVA 9 kVA |
| Standby | 10 kVA 10 kVA |
General
| Number of Cylinders | 3 inline 3 inline |
| Bore | 3 in 77 mm |
| Stroke | 3.1 in 81 mm |
| Displacement | 69 in³ 1.1 l |
| Compression Ratio | 23.0:1 23.0:1 |
| Aspiration | Naturally Aspirated Naturally Aspirated |
| Combustion System | Indirect Injection Indirect Injection |
| Rotation from Flywheel End | Anti-clockwise Anti-clockwise |
| Cooling System | Liquid Liquid |
| Aftertreatment | - - |
| Typical Alternator Efficiency | 86% 86% |
| Switchable | No No |
ElectropaK Dimensions
| Length | 30.5 in 775 mm |
| Width | 17.2 in 438 mm |
| Height | 27.6 in 702 mm |
| Dry Weight | 284 lb 129 kg |
Disclaimer
| Note 1 | *Final dimensions dependent on selected options *Final dimensions dependent on selected options |
Definitions
| Prime Power | Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. |
| Standby Power | Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted. |
403A-11G Standard Equipment
Air inlet system
- Mounted air filter
Control system
- 12 volt Electronic Shut Off Solenoid (ESOS) energised to run
- 12 volt starter motor and 12 volt 15 amp alternator with DC output
- Glow plug cold start aid and heater/starter switch
- Oil pressure and coolant temperature switches
Cooling system
- Thermostatically-controlled system with belt driven coolant pump and pusher fan
- Mounted radiator, piping and guards
Flywheel and flywheel housing
- Flywheel housing SAE 5 long
- High inertia flywheel to SAE J620 Size 165.1 mm (6½ in) heavy
Fuel system
- Mechanically governed cassette type fuel injection pump
- Split element fuel filter
General
- Front and rear engine mounting brackets
Oil system
- Spin-on full flow lub oil filter
- Wet steel sump with filler and dipstick
See how 403A-11G compares against frequently compared products.
Electric Power Generation
403A-11G
Selected
- Gross Mechanical Output
- 8.6-9.5 kWm
- 8.6-9.5 kWm
- Typical Electrical Output
- 9-10 kVA (7.2-8 kWe)
- 9-10 kVA (7.2-8 kWe)
- Emissions
- Fuel Optimised
- Fuel Optimised
Electric Power Generation
403J-07G
- Gross Mechanical Output
- 6.0-6.6 kWm
- 6.0-6.6 kWm
- Typical Electrical Output
- 5.8-6.4 kVA (4.7-5.1 kWe)
- 5.8-6.4 kVA (4.7-5.1 kWe)
- Emissions
- EU Stage V
- EU Stage V
Electric Power Generation
403D-11G
- Gross Mechanical Output
- 8-18 kWm
- 8-18 kWm
- Typical Electrical Output
- 9-20 kVA (7-16 kWe)
- 9-20 kVA (7-16 kWe)
- Emissions
- EU Stage IIIA/U.S. EPA Tier 4 interim
- EU Stage IIIA/U.S. EPA Tier 4 interim
Perkins product brochures and other informational documents are available for your growing business.
