Auxiliary 415GM

Speak to an expert Find your Distributor

Key Specs

Minimum Power
16.5 HP
12.3 kW
Maximum Power
19.7 HP
14.7 kW
Emissions
Meets EPA Tier 3, EU97/68/EU Stage IIIA
Meets EPA Tier 3, EU97/68/EU Stage IIIA

Overview

Our marine engines for auxiliary applications give you low cost of ownership, excellent fuel economy and competitive prices both for engine and parts. Auxiliary engines generate a vessel's on-board electricity, so they need to be quick to start and feature low noise and low emissions. For heavy duty requirements, such as powering a large fishing vessel's electrically driven net haul system, you really need the extra power that a dedicated auxiliary engine will give to you – rather than generating electricity from the propulsion engine.

Product Specifications for 415GM

more_vert
Save this as your preferred unit of measurement clear
Minimum Power 16.5 HP 12.3 kW
Maximum Power 19.7 HP 14.7 kW
Rated Speed 1500-1800 rpm 1500-1800 rpm
Maximum Torque 63.4 lb-ft @ 1500 rpm 85.9 Nm @ 1500 rpm
Emissions Meets EPA Tier 3, EU97/68/EU Stage IIIA Meets EPA Tier 3, EU97/68/EU Stage IIIA
Bore 3.3 in 84 mm
Stroke 3.5 in 90 mm
Displacement 91.3 in³ 1.5 l
Aspiration Naturally aspirated Naturally aspirated
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Combustion System Indirect injection Indirect injection
Number of Cylinders 3 inline 3 inline
Total Lubricating Capacity 1.5 gal (US) 6 l
Cooling System Liquid Liquid
Total Coolant Capacity 2.1 gal (US) 8 l
Cycle 4 stroke 4 stroke
Compression Ratio 22.5:1 22.5:1
Dry Weight 454.1 lb 206 kg
Width 22.3 in 566 mm
Wet Weight 469.6 lb 213 kg
Height 26.5 in 672 mm
Length - Flywheel Housing 23.4 in 595 mm
Note 1 Final dimensions dependent on selected options Final dimensions dependent on selected options

415GM Standard Equipment

Air inlet system

  • Mounted air filters
  • Fresh water cooled exhaust manifold incorporating header tank assembly

Control system

  • 12 volt starter motor and 12 volt 55 amp alternator with DC output
  • Glow plug cold start aid and heater/starter switch
  • Oil pressure and coolant temperature switches

Cooling system

  • Fresh water heat exchanger cooled engine with gear driven self priming raw water pump and ceramic seals
  • Thermostatically controlled system with belt driven circulating pump

Flywheels and flywheel housing

  • Flywheel housing SAE 4 long
  • High inertia flywheel to SAE J620 size 7½ heavy

Fuel system

  • Electronically governed cassette type fuel injection pump
  • Single element fuel filter

General

  • Front and rear mounting brackets
  • User's Handbook

Oil system

  • Spin on, full flow lubricating oil filter
  • Wet steel sump with filler and dipstick

See how 415GM compares against frequently compared products.

more_vert
Save this as your preferred unit of measurement clear