854E-E34TA Industrial Diesel Engine

< Back


Our 850 Series Tier 4 interim engines are designed to meet the needs of customers operating in EU Stage IIIB/U.S. EPA Tier 4 Interim equivalent territories. The 854E models build on more than 80 years of Perkins innovation and customer insights, offering you world-class power density in a compact package. They provide the ideal choice for telehandlers, backhoe loaders, skid steer loaders, access platforms, agricultural tractors and many other applications.


3.4 litre

63-86 kW (84-115 hp)

Designed to meet EU Stage IIIB/U.S. EPA Tier 4 Interim equivalent emissions standards

The 854E-E34TA industrial engine is a turbocharged, air-to-air chargecooled, 3.4 litre, 4 cylinder unit. Its high power density and excellent torque mean OEMs can choose this engine where previously they might have used an engine with a higher cubic capacity. Downsizing in this way gives you cost benefits and frees up space.

Power Rating

Minimum Power 84.5 HP 63.0 kW Less
Maximum Power 115.3 HP 86.0 kW Less
Maximum Torque 331.9 lb-ft @ 1400 rpm 450.0 Nm @ 1400 rpm Less
Rated Speed 2200-2500 rpm 2200-2500 rpm Less

Emission Standards

Emissions EU Stage IIIB/U.S. EPA Tier 4 Interim equivalent EU Stage IIIB/U.S. EPA Tier 4 Interim equivalent Less


Bore 3.9 in 99.0 mm Less
Stroke 4.3 in 110.0 mm Less
Displacement 207.5 in³ 3.4 l Less
Aspiration Turbocharged aftercooled Turbocharged aftercooled Less
Rotation from Flywheel End Anti-clockwise Anti-clockwise Less
Combustion System Direct injection Direct injection Less
Compression Ratio 17:1 17:1 Less
Cooling System Liquid Liquid Less
Cycle 4 stroke 4 stroke Less
Number of Cylinders 4 inline 4 inline Less
Total Coolant Capacity 1.6 gal (US) 6.0 l Less
Total Lubricating Capacity 2.51 gal (US) 9.5 l Less

Aftertreatment Dimensions* - DOC/DPF Wall Flow

Diameter 7.1 in 180.0 mm Less
Length 21.3 in 541.0 mm Less
Weight 44.0 lb 20.0 kg Less

Engine Dimensions*

Dry Weight 595.2 lb 270.0 kg Less
Height 32.3 in 822.0 mm Less
Length 29.4 in 747.5 mm Less
Width 26.1 in 662.0 mm Less

A lifetime of low cost

Low cost of ownership is an important benefit of the 854E. With fuel consumption optimised to match the operating cycles of a wide range of equipment and applications – and no additional fluids or additives required – your operating costs will be lowered. The engines are designed and built for dependability and durability, which results in minimum maintenance requirements.

Low cost maintenance is achieved through hydraulic tappets, multi-vee belts and 500 hour oil change intervals.

Performance in a small package

Our 854E engines give you more power in a compact package. They provide 63–86 kW (84–115 hp) with torque of up to 450 Nm.

The compact design of the engine means it's suitable for a range of applications including agricultural tractors, telehandlers, access platforms, air compressors, forklift trucks, trenchers, skid steer loaders, excavators and backhoe loaders. These engines meet the challenge if you're looking to create smaller, higher performing, cost effective machines.

854E-E34TA Industrial Diesel Engine Standard Equipment

Aftertreatment technology
  • DPF - Diesel Particulate Filter
  • DOC - Diesel Oxidation Catalyst

Air inlet system
  • Induction manifolds
  • Exhaust manifolds

Cooling system
  • Cooling packs
  • Fan drives and locations

Control system
  • Alternator
  • Electronic Control Module
  • Sensors for: Engine speed; Oil pressure; Coolant temperature
  • Starter motor
  • Wiring harness

Flywheels and flywheel housing
  • Adapter plates
  • Flywheel and starter rings
  • Flywheel housings

Fuel system
  • Common rail fuel pump and injectors
  • Fuel filter positions

  • Cold start capability
  • Engine mountings

Oil system
  • Lubricating oil filters and breathers

Power take-off
  • Belt driven auxiliaries
  • Front end drives
  • SAE A PTO drive
  • Timing case gear driven auxiliaries