Fuel Optimised Models 1104C-44TG

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
56-62 kWm
56-62 kWm
Typical Electrical Output
60-67 kVA (48-53 kWe)
60-67 kVA (48-53 kWe)
Emissions
EU Stage II/U.S. EPA Tier 2
EU Stage II/U.S. EPA Tier 2

Overview

Our 1104 ElectropaK engines set the industry standard for prime and standby power generation. The 4 cylinder, 4.4 litre engines are smooth and quiet in operation. They can also be electronically controlled, giving you the right fuel combustion for the load applied to the engine. The engines deliver 43.7-126.5 kVA, meeting the key power nodes.

Product Specifications for 1104C-44TG

Gross Mechanical Output 56-62 kWm 56-62 kWm
Typical Electrical Output 60-67 kVA (48-53 kWe) 60-67 kVA (48-53 kWe)
Rated Speed 1500/1800 rpm 1500/1800 rpm
Prime 60.4 kVA 60.4 kVA
Standby 66.7 kVA 66.7 kVA
Prime 54.3 kWe 54.3 kWe
Standby 60 kWe 60 kWe
Emissions EU Stage II/U.S. EPA Tier 2 EU Stage II/U.S. EPA Tier 2
Number of Cylinders 4 inline 4 inline
Bore 4.13 in 105 mm
Stroke 5 in 127 mm
Displacement 269 in³ 4.4 l
Compression Ratio 18.2:1 18.2:1
Aspiration Turbocharged Turbocharged
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 90% 90%
Switchable Yes Yes
Length 48.8 in 1239 mm
Width 24.2 in 615 mm
Height 37.4 in 951 mm
Dry Weight 884 lb 401 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Prime Power Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted.

1104C-44TG Standard Equipment

Air inlet system

  • Mounted air filter

Control system

  • 12 volt shutdown solenoid energised to run
  • 12 volt starter motor and 12 volt 65 amp alternator with DC output

Cooling system

  • Mounted radiator and piping
  • Thermostatically controlled system with gear driven circulation pump and belt driven pusher fan

Flywheels and flywheel housing

  • Flywheel to SAE J620 size 10/11½
  • SAE No. 3 flywheel housing

Fuel system

  • Ecoplus fuel filter
  • Rotary type pump

General

  • Glow plug cold start aid

Oil system

  • Cast iron sump with filler and dipstick
  • Spin-on oil filter

See how 1104C-44TG compares against frequently compared products.