Fuel Optimised Models 1106A-70TG

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
127-160 kWm
127-160 kWm
Typical Electrical Output
135-169 kVA (108-135 kWe)
135-169 kVA (108-135 kWe)
Emissions
Fuel Optimised
Fuel Optimised

Overview

The 6 cylinder, 7 litre Perkins 1106 range of ElectropaK engines gives you all the power you need for electric power generation. The engines in the range share a common platform with the option of mechanical and common rail fuel systems enabling use of the same platform over different emissions territories. Reliable, dependable and with a low cost of ownership, the engines can cope with variations in fuel quality that occur in different parts of the world.

Product Specifications for 1106A-70TG

Gross Mechanical Output 127-160 kWm 127-160 kWm
Typical Electrical Output 135-169 kVA (108-135 kWe) 135-169 kVA (108-135 kWe)
Rated Speed 1500/1800 rpm 1500/1800 rpm
Prime 135 kVA 135 kVA
Standby 150 kVA 150 kVA
Prime 121.5 kWe 121.5 kWe
Standby 135 kWe 135 kWe
Emissions Fuel Optimised Fuel Optimised
Number of Cylinders 6 vertical inline 6 vertical inline
Bore 4.13 in 105 mm
Stroke 5.3 in 135 mm
Displacement 428 in³ 7 l
Compression Ratio 18.2:1 18.2:1
Aspiration Turbocharged Turbocharged
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 91% 91%
Switchable No No
Length 65 in 1648 mm
Width 30 in 760 mm
Height 43 in 1092 mm
Dry Weight 1629 lb 739 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Prime Power Unlimited hours usage, with an average load factor of 80 percent over each 24 hour period. A 10 percent overload is available for 1 hour in every12 hours operation. Unlimited hours usage, with an average load factor of 80 percent over each 24 hour period. A 10 percent overload is available for 1 hour in every12 hours operation.
Standby Power Limited to 500 hours annual usage, with an average load factor of 80 percent of the published Standby power rating over each 24 hour period. Up to 300 hours of annual usage may be run continuously. No overload is permitted on Standby power. Limited to 500 hours annual usage, with an average load factor of 80 percent of the published Standby power rating over each 24 hour period. Up to 300 hours of annual usage may be run continuously. No overload is permitted on Standby power.

1106A-70TG Standard Equipment

Air inlet system

  • Air cleaner and brackets
  • Exhaust manifold
  • Induction manifold

Control system

  • Alternator
  • Starter motor

Cooling system

  • Tropical radiator pipes and guards

Flywheels and flywheel housing

  • Flywheel and starter ring

Fuel system

  • Fuel filter

General

  • Cold start aid
  • Engine mountings

Oil system

  • Lubricating oil sump
  • Oil filters

See how 1106A-70TG compares against frequently compared products.