Fuel Optimised Models 1104A-44TG

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
59.6 -94.5 kWm
59.6 -94.5 kWm
Typical Electrical Output
65-100 kVA (52-80 kWe)
65-100 kVA (52-80 kWe)
Emissions
Fuel Optimised
Fuel Optimised

Overview

Our 1104 ElectropaK engines set the industry standard for prime and standby power generation. The 4 cylinder, 4.4 litre engines are smooth and quiet in operation. They can also be electronically controlled, giving you the right fuel combustion for the load applied to the engine. The engines deliver 43.7-126.5 kVA, meeting the key power nodes.

Product Specifications for 1104A-44TG

Gross Mechanical Output 59.6 -94.5 kWm 59.6 -94.5 kWm
Typical Electrical Output 65-100 kVA (52-80 kWe) 65-100 kVA (52-80 kWe)
Rated Speed 1500/1800 rpm 1500/1800 rpm
Prime 65-80 kVA 65-80 kVA
Standby 71.5-88 kVA 71.5-88 kVA
Prime 60.8-73 kWe 60.8-73 kWe
Standby 66.9-80.3 kWe 66.9-80.3 kWe
Emissions Fuel Optimised Fuel Optimised
Number of Cylinders 4 vertical inline 4 vertical inline
Bore 4.13 in 105 mm
Stroke 5 in 127 mm
Displacement 269 in³ 4.4 l
Compression Ratio 17.25:1 17.25:1
Aspiration Turbocharged Turbocharged
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 89% 89%
Switchable Yes Yes
Length 48.9 in 1241 mm
Width 24.8 in 629 mm
Height 37.4 in 951 mm
Dry Weight 1021 lb 463 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Prime Power Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted.

1104A-44TG Standard Equipment

Air inlet system

  • Mounted air filter

Control system

  • 12 volt starter motor and 12 volt 65 amp alternator with DC output
  • 12 volt shutdown solenoid energised to run

Cooling system

  • Mounted radiator and piping
  • Thermostatically controlled system with gear-driven circulation pump and belt-driven pusher fan

Flywheels and flywheel housing

  • High inertia flywheel to SAE J620 size 10/11½
  • SAE 3 flywheel housing

Fuel system

  • Ecoplus fuel filter
  • Rotary type pump

General

  • Glow plug cold start aid

Oil system

  • Wet sump with filler and dipstick
  • Spin-on oil filter

See how 1104A-44TG compares against frequently compared products.