Fuel Optimised Models 1106A-70TAG

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
140-204 kWm
140-204 kWm
Typical Electrical Output
150-220 kVA (120-176 kWe)
150-220 kVA (120-176 kWe)
Emissions
Fuel Optimised
Fuel Optimised

Overview

The 6 cylinder, 7 litre Perkins 1106 range of ElectropaK engines gives you all the power you need for electric power generation. The engines in the range share a common platform with the option of mechanical and common rail fuel systems enabling use of the same platform over different emissions territories. Reliable, dependable and with a low cost of ownership, the engines can cope with variations in fuel quality that occur in different parts of the world.

Product Specifications for 1106A-70TAG

Gross Mechanical Output 140-204 kWm 140-204 kWm
Typical Electrical Output 150-220 kVA (120-176 kWe) 150-220 kVA (120-176 kWe)
Rated Speed 1500/1800 rpm 1500/1800 rpm
Prime 150.0-200 kVA 150.0-200 kVA
Standby 165.0-220 kVA 165.0-220 kVA
Prime 132.0-156.8 kWe 132.0-156.8 kWe
Standby 146.5-173 kWe 146.5-173 kWe
Emissions Fuel Optimised Fuel Optimised
Number of Cylinders 6 vertical inline 6 vertical inline
Bore 4.13 in 105 mm
Stroke 5.3 in 135 mm
Displacement 428 in³ 7.01 l
Compression Ratio 16:1-18.2:1 16:1-18.2:1
Aspiration Turbocharged aftercooled Turbocharged aftercooled
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 91-92% 91-92%
Switchable Yes Yes
Length 67.2 in 1706 mm
Width 29.8 in 756 mm
Height 43 in 1092 mm
Dry Weight 1638 lb 743 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Prime Power Unlimited hours usage, with an average load factor of 80% over each 24 hour period. A 10% overload is available for 1 hour in every 12 hours operation. Unlimited hours usage, with an average load factor of 80% over each 24 hour period. A 10% overload is available for 1 hour in every 12 hours operation.
Standby Power Limited to 500 hours annual usage, with an average load factor of 80% of the published standby power rating over each 24 hour period. Up to 300 hours of annual usage may be run continuously. No overload is permitted on standby power. Limited to 500 hours annual usage, with an average load factor of 80% of the published standby power rating over each 24 hour period. Up to 300 hours of annual usage may be run continuously. No overload is permitted on standby power.

1106A-70TAG Standard Equipment

Air inlet system

  • Air cleaner and brackets
  • Exhaust manifold
  • Induction manifold

Cooling system

  • Tropical radiator pipes and guards

Control system

  • Alternator
  • Starter motor

Flywheels and flywheel housing

  • Flywheel and starter ring

Fuel system

  • Fuel filter

General

  • Cold start aid
  • Engine mountings

Oil system

  • Lubricating oil sump
  • Oil filters

See how 1106A-70TAG compares against frequently compared products.