< Back

Overview

Although the Perkins 2800 range of diesel engines caters for both prime and standby generation, the engines are proving particularly popular for the standby market sector. They can deliver 514-652 kWm engine power and 591-750 kVA generator output, along with mechanically operated unit fuel injectors, electronic control and carefully matched turbocharging. And, with flexible packaging, the Perkins 2800 range will fit into whatever space you have available within your equipment.

2806A-E18TAG ELECTROPAK ENGINE

18.1 litre

600-750 kVA generator output

This engine is designed for use in unregulated territories.

Power Rating

Units:
Mechanical Output 522-652 kWm 522-652 kWm Less
Electrical Output 600-750 kVA (480-600 kWe) 600-750 kVA (480-600 kWe) Less
Rated Speed 1500/1800 rpm 1500/1800 rpm Less

Emission Standards

Emissions This engine does not comply to Harmonised International Regulated Emissions Limits This engine does not comply to Harmonised International Regulated Emissions Limits Less

General

Bore 5.71 in 145.0 mm Less
Stroke 7.2 in 183.0 mm Less
Displacement 1104.53 in³ 18.1 l Less
Aspiration Turbocharged and air-to-air charge cooled Turbocharged and air-to-air charge cooled Less
Rotation from Flywheel End Anti-clockwise Anti-clockwise Less
Combustion System Direct injection Direct injection Less
Compression Ratio 14.5:1 14.5:1 Less
Cooling System Liquid Liquid Less
Cycle 4 stroke 4 stroke Less
Number of Cylinders 6 vertical inline 6 vertical inline Less
Total Coolant Capacity 16.11 gal (US) 61.0 l Less
Total Lubricating Capacity 16.38 gal (US) 62.0 l Less

Disclaimer

Note 1 Final dimensions dependent on selected options Final dimensions dependent on selected options Less

Engine Dimensions*

Dry Weight 4519.48 lb 2050.0 kg Less
Height 71.18 in 1808.0 mm Less
Length 100.2 in 2545.0 mm Less
Width 60.47 in 1536.0 mm Less

Optional equipment

Options for your 2800 range of engines include:

•    110 volt/240 volt immersion heater

•    Additional speed sensor

•    Temperature and pressure sensors for gauges

•    Electric hours counter

•    Air filter rain hood

•     Twin starters/facility for second starter

•    Tool kit

Reliability and efficiency

The engines in our 2800 range have mechanically operated unit fuel injectors, with electronic control and carefully matched turbocharging. They give the engines excellent fuel atomisation and combustion and good fuel economy. The electronic control of the injected fuel also contributes to low emissions.

Our engines in the 2800 range give you:

•    Reliable power

•    Low oil usage

•    Low wear rates

•    High compression ratios to ensure clean, rapid starting in all conditions

Our ElectropaK 2800 range of engines is delivered to you with the radiator and air cleaner system already built in, allowing you to simply bolt the engine down, connect it up and start generating.

With exceptional power-to-weight ratios and compact size, the 2800 range engines are easy to transport and install, while providing you with excellent service access for ease of maintenance.

2806A-E18TAG Standard Equipment

Air inlet system
  • Mounted air filter

Cooling system
  • Gear-driven circulating pump
  • Low coolant level switch
  • Mounted belt-driven fan
  • Radiator incorporating air-to-air charge cooler, (supplied loose)
  • System designed for ambients up to 50ºC (122ºF)

Electrical equipment
  • 3 level engine protection system
  • 24 volt starter motor and 24 volt 70 amp alternator with DC output
  • ECM mounted on engine with wiring looms and sensors

Flywheels and flywheel housing
  • High inertia flywheel to SAE J620 size 18
  • SAE '0' flywheel housing

Fuel system
  • Fuel cooler
  • Governing to ISO 8528-5 class G2 with isochronous capability
  • Mechanically actuated electronically controlled unit fuel injectors with full authority electronic control
  • Replaceable ‘Ecoplus' fuel filter elements with primary filter/water separator

Mountings
  • Front engine mounting bracket

Oil system
  • Full-flow replaceable ‘Ecoplus' filter
  • Oil cooler integral with filter header
  • Wet sump with filler and dipstick

Optional equipment
  • 110 volt/240 volt immersion heater
  • Additional speed sensor
  • Air filter rain hood
  • Electric hours counter
  • Temperature and pressure sensors for gauges
  • Tool kit
  • Twin starters/facility for second starter