Certified Models 1104C-44G

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
44-59 kVA (35-47 kWe)
44-59 kVA (35-47 kWe)
Typical Electrical Output
39-54 kWm
39-54 kWm
Emissions
EU Stage II/U.S. EPA Tier 2
EU Stage II/U.S. EPA Tier 2

Overview

Our 1104 ElectropaK engines set the industry standard for prime and standby power generation. The 4 cylinder, 4.4 litre engines are smooth and quiet in operation. They can also be electronically controlled, giving you the right fuel combustion for the load applied to the engine. The engines deliver 43.7-126.5 kVA, meeting the key power nodes.

Product Specifications for 1104C-44G

Gross Mechanical Output 44-59 kVA (35-47 kWe) 44-59 kVA (35-47 kWe)
Typical Electrical Output 39-54 kWm 39-54 kWm
Rated Speed 1500/1800 rpm 1500/1800 rpm
Prime 43.7 kVA 43.7 kVA
Standby 48.2 kVA 48.2 kVA
Prime 39.1 - 42.6 kWe 39.1 - 42.6 kWe
Standby 43.1 - 47.1 kWe 43.1 - 47.1 kWe
Emissions EU Stage II/U.S. EPA Tier 2 EU Stage II/U.S. EPA Tier 2
Number of Cylinders 4 inline 4 inline
Bore 4.13 in 105 mm
Stroke 5 in 127 mm
Displacement 269 in³ 4.4 l
Compression Ratio 19.3:1 19.3:1
Aspiration Naturally aspirated Naturally aspirated
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 90% 90%
Switchable Available for some power nodes Available for some power nodes
Length 45.8 in 1163 mm
Width 24.5 in 623 mm
Height 37.4 in 951 mm
Dry Weight 851 lb 386 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Prime Power Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted.

1104C-44G Standard Equipment

Air inlet system

  • Mounted air filter

Control system

  • 12 volt shutdown solenoid energised to run
  • 12 volt starter motor and 12 volt 65 amp alternator with DC output

Cooling system

  • Mounted radiator and piping
  • Thermostatically controlled system with gear driven circulation pump and belt driven pusher fan

Flywheels and flywheel housing

  • Flywheel to SAE J620 size 10/11½
  • SAE No. 3 flywheel housing

Fuel system

  • Ecoplus fuel filter
  • Rotary type pump

General

  • Glow plug cold start aid

Oil system

  • Spin-on oil filter
  • Wet Cast iron sump with filler and dipstick

See how 1104C-44G compares against frequently compared products.