Certified Models 1103C-33TG

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
42 - 52 kWm
42 - 52 kWm
Typical Electrical Output
46-59 kVA (37-47 kWe)
46-59 kVA (37-47 kWe)
Emissions
EU Stage II/U.S. EPA Tier 2
EU Stage II/U.S. EPA Tier 2

Overview

Our 1103 range of electric power engines provides cost effective power solutions for prime and standby generation. The engines also meet up to EU Stage IIIA/U.S. EPA Tier 3 equivalent emission standards. The compact 3 cylinder, 3.3 litre engines feature exceptional performance criteria in fuel economy for prime power applications and high load acceptance for standby installations.

Product Specifications for 1103C-33TG

Gross Mechanical Output 42 - 52 kWm 42 - 52 kWm
Typical Electrical Output 46-59 kVA (37-47 kWe) 46-59 kVA (37-47 kWe)
Rated Speed 1500/1800 rpm 1500/1800 rpm
Prime 46 kVA 46 kVA
Standby 51 kVA 51 kVA
Prime 42 kWe 42 kWe
Standby 47 kWe 47 kWe
Emissions EU Stage II/U.S. EPA Tier 2 EU Stage II/U.S. EPA Tier 2
Number of Cylinders 3 inline 3 inline
Bore 4.13 in 105 mm
Stroke 5 in 127 mm
Displacement 202 in³ 3.3 l
Compression Ratio 18.23:1 18.23:1
Aspiration Turbocharged Turbocharged
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 90% 90%
Switchable No No
Length 41.1 in 1045 mm
Width 24.8 in 631 mm
Height 37.4 in 951 mm
Dry Weight 752 lb 341 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Prime Power Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted.

1103C-33TG Standard Equipment

Air inlet system

  • Mounted air filter

Control system

  • 12 volt shutdown solenoid energised to run
  • 12 volt starter motor and 12 volt 65 amp alternator with DC output

Cooling system

  • Mounted radiator and piping
  • Thermostatically controlled system with gear driven circulation pump and belt driven pusher fan

Flywheels and flywheel housing

  • Flywheel to SAE J620 size 10/11½
  • SAE No. 3 flywheel housing

Fuel system

  • Ecoplus fuel filter
  • Rotary type pump

General

  • Glow plug cold start aid

Oil system

  • Cast iron sump with filler and dipstick
  • Spin-on oil filter

See how 1103C-33TG compares against frequently compared products.