Certified Models 403D-15G

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
12-19.7 kWm
12-19.7 kWm
Typical Electrical Output
13-24 kVA (10-19 kWe)
13-24 kVA (10-19 kWe)
Emissions
EU Stage IIIA/U.S. EPA Tier 4 interim
EU Stage IIIA/U.S. EPA Tier 4 interim

Overview

The Perkins 403 range of electric power (EP) engines delivers the same compact benefits of its 2 cylinder stablemate, but takes a stride forward in terms of noise, refinement and power. The 3 cylinder range offers excellent power density and superb fuel economy and is designed to meet your power generation needs in both unregulated territories where extreme conditions are likely, and higher regulated territories with more stringent emissions standards.

Product Specifications for 403D-15G

Gross Mechanical Output 12-19.7 kWm 12-19.7 kWm
Typical Electrical Output 13-24 kVA (10-19 kWe) 13-24 kVA (10-19 kWe)
Rated Speed 1500/1800/3000 rpm 1500/1800/3000 rpm
Prime 13.0-22 kVA 13.0-22 kVA
Standby 14.5-24 kVA 14.5-24 kVA
Prime 12.7 kWe 12.7 kWe
Standby 14 kWe 14 kWe
Emissions EU Stage IIIA/U.S. EPA Tier 4 interim EU Stage IIIA/U.S. EPA Tier 4 interim
Number of Cylinders 3 inline 3 inline
Bore 3.3 in 84 mm
Stroke 3.5 in 90 mm
Displacement 91.3 in³ 1.5 l
Compression Ratio 22.5:1 22.5:1
Aspiration Naturally aspirated Naturally aspirated
Combustion System Indirect injection Indirect injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 87-88% 87-88%
Switchable No No
Length 32.3 in 820 mm
Width 18.7 in 476 mm
Height 31.1 in 791 mm
Dry Weight 434 lb 197 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Note 2 ESE (1800 rpm - Certified model) only - Emergency Stationary Equipment ESE (1800 rpm - Certified model) only - Emergency Stationary Equipment
Prime Power Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted.

403D-15G Standard Equipment

Air inlet system

  • Mounted air filter

Control system

  • 12 volt Electronic Shut Off Solenoid (ESOS) energised to run
  • 12 volt starter motor and 12 volt 65 amp alternator with DC output
  • Glow plug cold start aid and heater/starter switch
  • Oil pressure and coolant temperature switches

Cooling system

  • Thermostatically controlled system with belt driven coolant pump and pusher fan
  • Mounted radiator, piping and guards

Flywheel and flywheel housing

  • 1500/1800 rpm high inertia flywheel to SAE J620 size 7½ heavy flywheel housing SAE 4 long
  • 3000 rpm high inertia flywheel to SAE J620 size 7½ light flywheel housing SAE 4 short

Fuel system

  • Mechanically governed cassette type fuel injection pump
  • Split element fuel filter

General

  • Front and rear engine mounting bracket

Oil system

  • Wet steel sump with filler and dipstick
  • Spin-on full flow lubricating oil filter

See how 403D-15G compares against frequently compared products.