Certified Models 1104D-E44TG

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
65-72 kWm
65-72 kWm
Typical Electrical Output
68-75 kVA (54-60 kWe)
68-75 kVA (54-60 kWe)
Emissions
EU Stage IIIA/U.S. EPA Tier 3
EU Stage IIIA/U.S. EPA Tier 3

Overview

Our 1104 ElectropaK engines set the industry standard for prime and standby power generation. The 4 cylinder, 4.4 litre engines are smooth and quiet in operation. They can also be electronically controlled, giving you the right fuel combustion for the load applied to the engine. The engines deliver 43.7-126.5 kVA, meeting the key power nodes.

Product Specifications for 1104D-E44TG

Gross Mechanical Output 65-72 kWm 65-72 kWm
Typical Electrical Output 68-75 kVA (54-60 kWe) 68-75 kVA (54-60 kWe)
Rated Speed 1800 rpm 1800 rpm
Prime 54.5 kWe 54.5 kWe
Standby 60 kWe 60 kWe
Emissions EU Stage IIIA/U.S. EPA Tier 3 EU Stage IIIA/U.S. EPA Tier 3
Number of Cylinders 4 inline 4 inline
Bore 4.13 in 105 mm
Stroke 5 in 127 mm
Displacement 269 in³ 4.4 l
Compression Ratio 16.7:1 16.7:1
Aspiration Turbocharged Turbocharged
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 88.5% 88.5%
Switchable No No
Length 50.4 in 1280 mm
Width 28.2 in 717 mm
Height 38.1 in 967 mm
Dry Weight 968 lb 439 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Note 2 ESE (1800 rpm) only - Emergency Stationary Equipment ESE (1800 rpm) only - Emergency Stationary Equipment
Prime Power Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted.

1104D-E44TG Standard Equipment

Air inlet system

  • Mounted air filter and turbocharger

Control system

  • 12 volt starter motor and 12 volt 65 amp alternator with DC output

Cooling system

  • Belt driven pusher fan and guards
  • Mounted radiator and piping
  • Water pump

Flywheels and flywheel housing

  • High inertia flywheel to SAE J620 size 10/11
  • SAE No. 3 flywheel housing

Fuel system

  • Electronic governing (conforms to Class G3 ISO 8528-5)
  • Fuel filter

General

  • Glow plug start aid

Oil system

  • Oil filter
  • Cast iron sump with filler and dipstick

See how 1104D-E44TG compares against frequently compared products.