Certified Models 1104C-44TAG

Speak to an expert Find your Distributor

Key Specs

Gross Mechanical Output
75-117.5 kWm
75-117.5 kWm
Typical Electrical Output
80-126.5 kVA (64-101 kWe)
80-126.5 kVA (64-101 kWe)
Emissions
EU Stage II/U.S. EPA Tier 2
EU Stage II/U.S. EPA Tier 2

Overview

Our 1104 ElectropaK engines set the industry standard for prime and standby power generation. The 4 cylinder, 4.4 litre engines are smooth and quiet in operation. They can also be electronically controlled, giving you the right fuel combustion for the load applied to the engine. The engines deliver 43.7-126.5 kVA, meeting the key power nodes.

Product Specifications for 1104C-44TAG

Gross Mechanical Output 75-117.5 kWm 75-117.5 kWm
Typical Electrical Output 80-126.5 kVA (64-101 kWe) 80-126.5 kVA (64-101 kWe)
Rated Speed 1500/1800 rpm 1500/1800 rpm
Prime 80.4-101.4 kVA 80.4-101.4 kVA
Standby 88.8-111.9 kVA 88.8-111.9 kVA
Prime 72.4-91.5 kWe 72.4-91.5 kWe
Standby 80-101.2 kWe 80-101.2 kWe
Emissions EU Stage II/U.S. EPA Tier 2 EU Stage II/U.S. EPA Tier 2
Number of Cylinders 4 inline 4 inline
Bore 4.13 in 105 mm
Stroke 5 in 127 mm
Displacement 269 in³ 4.4 l
Compression Ratio 18.2:1 18.2:1
Aspiration Turbocharged air-to-air charge cooled Turbocharged air-to-air charge cooled
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Cooling System Liquid Liquid
Aftertreatment - -
Typical Alternator Efficiency 90 90
Switchable Yes Yes
Length 49.6 in 1259 mm
Width 28.4 in 721 mm
Height 38 in 966 mm
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options
Prime Power Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation.
Standby Power Power available at variable load in the event of a main power network failure. No overload is permitted. Power available at variable load in the event of a main power network failure. No overload is permitted.

1104C-44TAG Standard Equipment

Air inlet system

  • Mounted air filter

Control system

  • 12 volt shutdown solenoid energised to run
  • 12 volt starter motor and 12 volt 65 amp alternator with DC output

Cooling system

  • Mounted radiator and piping incorporating air-to-air charge cooler
  • Thermostatically controlled system with gear driven circulation pump and belt driven pusher fan

Flywheels and flywheel housing

  • Flywheel to SAE J620 size 10/11½
  • SAE No. 3 flywheel housing

Fuel system

  • Ecoplus fuel filter
  • Rotary type pump

General

  • Glow plug cold start aid

Oil system

  • Wet steel sump with filler and dipstick
  • Spin-on oil filter

See how 1104C-44TAG compares against frequently compared products.