Not all engine oils are the same. A good oil will be formulated for specific engine needs. Using it will maximise your engine life, control emissions and reduce the cost of maintenance. Perkins diesel engine oil (DEO) is a new custom formulation specially designed to meet the needs of our engines. It is the only oil recommended and approved by Perkins.
Perkins DEO is unique. It has been designed specifically to meet the needs of hard working off-road Perkins diesel engines.
Whilst other oils are formulated to meet the minimum specification requirements, Perkins DEO has been formulated specifically for the long operating life, and performance of Perkins engines.
Resulting from more than 28 years of experience from across our wider business, thousands of hours in the field and many hundreds of hours testing.
Perkins DEO was tested under our business Engine Crankcase Fluid (ECF) 2 tests, and out-performed standard CI-4 oils. These tests run engines for service life periods under high load. Checking not only the condition of the oil at the end of the test, but also include taking the engine apart at the end of the test to inspect it for deposits on the rings, soot related wear and whether sludge has collected in the engine’s galleries and sump.
These are extreme condition tests, and Perkins DEO passed them easily.
The steady increase in emission standards has had a significant impact on oil specifications, as oil can both contribute and have an impact on reducing emissions. As a CI-4 oil, Perkins DEO meets the requirements of EU Stage IIIA/U.S. EPA Tier 3, and with its improved formulation it can also be used in engines below that level.
The formulation of Perkins DEO is unique to Perkins. To gain the benefits from Perkins DEO, talk to your local Perkins distributor. It is made up of three base oils to deliver the right viscosity across the working temperature ranges, and a combination of 12 additives, including:
“It was tested under our business Engine Crankcase Fluid tests, and out-performed standard CI-4 oils. These are extreme condition tests, and Perkins DEO passed them easily.”
This unique engine oil is made up of a mix of additives, designed specifically to prevent the build-up of conditions which can impair the oil performance, reduce operating life and potentially damage engine components.
Engine Oils are formulated for specific operating conditions. The base oils and additives typically used in engine, as well as transmission or hydraulic oils are blended to provide the desired lubricant performance in very different environments.Learn more
Many people think engine oils are all the same, and buy the cheapest. Oil quality in fact varies greatly. Lower quality oil will have a shorter working life. Its impact on your engine will be higher fuel consumption and emissions. Ultimately it will shorten your engine’s life.Learn more
Prior to its launch at the Middle East Electricity exhibition in March, the engine oil, a specially formulated lubricant for Perkins off-road diesel engines, underwent extensive trials with major telecommunication companies in Pakistan and Afghanistan.Learn more